4-hTechWizards.org

Building Scalable Cisco Inter Networks (BSCI)

When you study your textbooks, it is important to test the acquired knowledge and see how well you’ve absorbed the material. Practice exams. . . .

* To confirm what you’ve learned – Fill the gaps of what you missed * you used to answering questions to build confidence and familiarity

Here are 10 Multiple choice exams questions for you to practice:

______________________________

Question # 1 – ABC. com use the EIGRP routing protocol as a priority in their network. How does EIGRP advertise subnet masks for each destination network?

A. EIGRP advertises a fixed length subnet mask for each destination network.

B. EIGRP advertises only a classful subnet mask for each destination network.

C. EIGRP, like IGRP and RIP, does not advertise a subnet mask for each destination network.

D. EIGRP advertises prefix length for each destination network.

______________________

Question 2 # – You must specify EIGRP new ABC. com router. What command should you issue first to determine the IP EIGRP?

A. EIGRP router system, autonomic numberB. EIGRP ip Autonomous System numberC. ip EIGRP routingD. EIGRP router process-id

______________________

Question # 3 – carrying out routine checks your OSPF network you will see that the Designated Router (DR) may be overloaded, and you’re considering amending DR. What are three ways you can manipulate the elections in DR? (Choose three)

A. The primary use of the command. B. Use the router-id command. C. bind loopback. D. minimize the IP address. Adding additional memory to your router.

______________________

Question # 4 – Comparing OSPF and IS-IS, three of which are characteristics of the IS-IS, OSPF, but is not? (Choose three)

A. IS-IS encapsulates PDUs directly into the data-link frame

B. IS-IS uses a default IOS metric of 10 on each interface

C. IS-IS passes China (Partial Route Calculations) to calculate IP reachability information

D. IS-IS uses stubby areas to improve network scalability

E. IS-IS use the on-demand circuit to reduce the hello and LSA flooding connected to WAN connections such as ISDN

F. IS-IS use the DIS and DIS back to psuedo-node on LAN

______________________

Question # 5 – You have recently been appointed as ABC. com trainee wants to know why Level-3 area routing is not a supported feature of integrated IS-IS Cisco routers. What is your response?

A. System ID: Cisco router is only 6 bytes.

B. NET Cisco router is limited to a maximum of 8 bytes.

C. Lack of Domain NSAP only accommodate two-level routing hierarchy.

D. Cisco routers do not route CLNS data are used for ISO / IEC 10 589 standard NSAP address.

E. Since the NSAP service identifier (N-SEL) is always set to 00, does not change the types of service are available.

______________________

Question # 6 – The network is using BGP and EIGRP. If you are considering re-allocating your own EIGRP BGP routes. What are the factors you should consider before redistributing BGP routes to IGP?

A. iGPS is limited to 250 routes

B. complete BGP routing table can be 100 000 + routes

C. As a possible route loops, Cisco router configuration does not allow re-BGP routes into IGP.

D. Since the BGP routes are not advertised unless they are known, IGP, Cisco BGP routes to the other automatically.

______________________

Question # 7 – ABC. com network administrator has configured the route filters in your router. What are three reasons to control routing updates via route filtering? (Choose three)

A. implementationB easier. SecurityC simple. You can manage the network above is fixed. To hide certain networks from other Organization. To prevent the formation of adjacencies

______________________

Question # 8 – ZXBP47 Router is configured route reflector. What would happen if a router ZXBP47 peer should update the various autonomous systems?

A. It rejects the update. B. It sends the update to all IBGP peers. C. It will send the update only to have customers. D. It will send the update only to route reflector clients. E. It sends the update to all routers in the Autonomous Community.

______________________

Question # 9 – PIM has been implemented ABC. com multicast network. When IP multicast is enabled via the PIM which mode to use the flood and cut method?

A. Bidir-PIMB. PIM-RPC. PIM sparse-denseD. PIM-pk. PIM-DM

______________________

Question # 10 – ABC. com is currently in transition to IP version 4 to version 6 Which two statements are true about the use of IPv4 and IPv6 at the same time a network segment? (Choose two)

A. IPV 6 provides more host IP addresses in addition to offering more IPv4 addresses in cyberspace.

B. Host IPv4 settings can be either permanently connected or connected via DHCP. Host IPv6 settings can only be statically configured.

C. IPV 4 and IPv6 addresses can be managed the host, but not through a router.

D. IPV 6 allows the host to create its own IPv6 address, which enables it to communicate with other devices to the network via DHCP. IPv4 does not have a similar capacity to the host.

E. Hosts can be set to receive both IPv4 and IPv6 addresses via DHCP.

______________________

ANSWERS

Question 1 # – Correct answers: DQuestion 2 # – Correct answers: AQuestion 3 # – correct answers: A, B, CQuestion 4 # – correct answers: A, B, CQuestion 5 # – Correct answers: CQuestion 6 # – correct answers: BQuestion 7 # – correct answers: B, C, DQuestion 8 # – Correct answers: BQuestion 9 # – Correct answers: EQuestion 10 # – correct answers: D, E

• 218 exceptionally realistic practice exam questions in the cd
• 360 free TranscenderFlash cards in the cd
• Comprehensive tutorials clarify why the right answer is right and why the other choices are wrong
• Detailed score report helps you save time by targeting areas where you need improvement
• Documentation references show you exactly where to look to study topics in detail

Product Description
Transcender certification prep products are industry best exam simulations that provide realistic simulations of IT certification. Cisco 640-816 practice exam prepare you for CCNA certification in confidence with 100% passing warranty. The exam covers topics VLSM and IPv6 addressing; extending switched networks, VLAN, configuring, verifying and troubleshooting VLANs, VTP, RSTP, OSPF and EIGRP protocols, determine IP routes, managing IP traffic. . . read more>>